Mercury Elite 2000 Pro Line – (2KVA)

Get the Mercury Elite 2000 Pro Line – (2KVA) at the best price in Kenya from Wodex Technologies

Rating input voltage: 2000 VA / 1200 W
Rating input frequency: 60/50Hz (auto sensing)
Input phase: Single phase
Input socket: With Fuse
Cold Start (0 to 100% load): Press the ON/OFF Switch
Input Range (220V): 140-300
Rating output(VA): 2000
Rating output (W): 1200
Power factor: 0.6
Rating output voltage (V): 220
Waveform: Battery mode (simulated sine wave),
AC Voltage Regulation: ±10% (Battery mode)
Rear output socket: 4 x Universal – Battery backup
Waveform: Simulated Sine Wave (Battery mode)
Line Mode: Synchronize with the utility
Rating frequency: 60Hz or 50 Hz ± 1 Hz
Battery Mode: Yellow flashing
Short circuit protection Line Mode: Fuse & Firmware protection
Short circuit protection Battery Mode: Firmware Protection
Overload protection Line Mode:110%±5%; Go to fault mode Line Mode after 5 minutes, 120%±5%; Go to fault mode immediately.
Overload protection Battery Mode: 110%±5%; Shutdown after 5 seconds, 120%±5%, Shutdown immediately
Indicators AC mode: Green Lighting
Indicators Battery Mode: Yellow Flashing
Indicators Fault: Red Lighting
Alarm Battery Mode: Sounding every 10 Seconds
Alarm Low Battery: Sounding every Second
Alarm Overload: Sounding every 0.5 second
Alarm Fault: Continuously sounding
Full Protection: Overload, discharge, and Overcharge protection
Transfer Time: Typical 2-6ms, 10ms max.
Transfer Time: Typical 2-6ms, 10ms max.
Communication Interface: Optional RS232/RJ11
Battery and runtime Rating: 2 X 12V/9AH
Recharge time – Typical 6-8 hours recover to 90% capacity
Charge current About 1A at normal mode.
Dimension, D X W X H (mm): 390 x 125 x 225
Net Weight (kgs): 12.7KGS
Humidity: 0-90 % RH @ 0- 40°C (non-condensing)
Noise Level: Less than 45dB
Compatible with OS: Supports Windows® 2000/2003/XP/Vista/2008/7
Communication interface: Elite 2000pro (N/A), Elite 2000ipro (USB/RJ11)