Cisco WAP131 Wireless-N Dual Band Access Point

Get the Cisco WAP131 Wireless-N Dual Band Access Point at the best price in Kenya from Wodex Technologies

The Cisco WAP131 Wireless-N Dual Band Access Point from Cisco provides a simple way to extend secure, high-performance mobile networking to your employees and guests, so they can stay connected anywhere in the office. This flexible solution lets you connect dozens of employees and can scale to accommodate additional users and changing business needs. The Cisco WAP131 Wireless-N Dual Radio Access Point uses concurrent dual-band radios for improved coverage and user capacity. The Gigabit Ethernet port allows the AP to be powered by PoE switch to help reduce cabling and wiring costs. Intelligent quality-of-service (QoS) features let you prioritize bandwidth, sensitive traffic for voice-over-IP (VoIP) and video applications. The Cisco WAP131 Wireless-N Dual Radio Access Point is easy to setup and use, with intuitive wizard-based configuration. An easy-to-use desktop design with an integrated stand allows you to place the AP on your desk vertically or horizontally. To enhance reliability and safeguard sensitive business information, the Cisco W AP131 Wireless-N Dual Radio Access Point supports both Wi-Fi Protected Access (WPA) Personal and Enterprise, encoding all your wireless transmissions with powerful encryption. In addition, 802.1x RADIUS authentications help keep unauthorized users out.

802.11N CONNECTIVITY FOR 2.4 AND 5 GHZ CLIENTS
SINGLE POWER OVER ETHERNET (POE) GIGABIT ETHERNET FOR CONNECTING TO POE SWITCH
PD PORT ALLOWS ACCESS POINT TO BE POWERED BY BACKBONE SWITCH
CONCURRENT DUAL-BAND RADIO SUPPORT FOR UP TO 300 MB/S PER RADIO TO MAXIMIZE CAPACITY AND COVERAGE
SINGLE GIGABIT ETHERNET LAN INTERFACE ENABLES A HIGH-SPEED UPLINK TO THE WIRED NETWORK
ROBUST SECURITY, INCLUDING WPA2, 802.1X WITH RADIUS SECURE AUTHENTICATION, AND ROGUE ACCESS POINT DETECTION, HELPS PROTECT SENSITIVE BUSINESS INFORMATION
SIMPLE INSTALLATION AND INTUITIVE WEB-BASED CONFIGURATION AND WIZARD ENABLE FAST, SIMPLE DEPLOYMENT, AND SETUP
DESKTOP DESIGN WITH INTEGRATED STAND, FOR EASY ACCESS AND PLACEMENT
INTELLIGENT QOS PRIORITIZES NETWORK TRAFFIC TO HELP KEEP CRITICAL NETWORK APPLICATIONS RUNNING
POWER-SAVING SLEEP MODE AND PORT CONTROL FEATURES HELP MAXIMIZE ENERGY EFFICIENCY
WORKGROUP BRIDGE MODE LETS YOU EXPAND YOUR NETWORK BY WIRELESSLY CONNECTING TO A SECOND ETHERNET NETWORK
SUPPORT FOR IPV6 LETS YOU DEPLOY FUTURE NETWORKING APPLICATIONS AND OPERATING SYSTEMS WITHOUT COSTLY UPGRADES

In the Box

Cisco WAP131 Wireless-N Dual Radio Access Point with PoE

AC Power Adapter
Ethernet Network Cable

Cisco WAP131 Specs

GENERAL
Standards	IEEE 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460)
Cabling Type	Category 5e or better
Antennas	Internal antennas optimized for desktop installation with vertical orientation
LED Indicators	Power, WLAN, LAN
Operating System	Linux
Quality of Service (QoS)	Wi-Fi Multimedia and Traffic Specification (WMM TSPEC), Client QoS
System Memory	RAM: 128 MB Flash: 128 MB
Minimum Requirements	Switch or router with PoE support, PoE injector, or AC power adapter Web-based Configuration: Java-enabled web browser

INTERFACES
Ports	10/100/1000 Ethernet, with support for 802.3af/at PoE, Power Port for AC adapter
Power Supply	External 12 V, 1.5 A DC power jack (Energy Star 2.0 compliant with Efficiency Level 5) and 802.3af/at PoE
Buttons	Reset button, Power (on/off), Push button
Cable Lock Slot	Slot for Kensington lock
LEDs	Power, Wireless, Ethernet

NETWORK
VLAN Support	Yes
Number of VLANs	1 management VLAN plus 8 VLANs for SSIDs
802.1X Supplicant	Yes
SSID-to-VLAN Mapping	Yes
Auto Channel Selection	Yes
Spanning Tree	Yes
Load Balancing	Yes
IPv6	IPv6 host support IPv6 RADIUS, syslog, Network Time Protocol (NTP), etc.
Layer 2 Features	802.1Q-based VLANS, 8 active VLANS plus 1 management VLAN

SECURITY
WPA/WPA2	Yes, including Enterprise authentication
Access Control	Yes, management access control list (ACL) plus MAC ACL
Secure Management	HTTPS
SSID	Yes

PERFORMANCE
Wireless Throughput	Up to 300 Mb/s data rate (real-world throughput will vary)
Recommended User Support	Up to 32 connective users, 16 active users per radio

CONFIGURATION
Web User Interface	Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)

MANAGEMENT
Management Protocols	Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour
Remote Management	Yes
Event Logging	Local, remote syslog, email alerts
Network Diagnostics	Logging and packet capture
Firmware Upgrade	Firmware upgradable through web browser, imported/exported configuration file
Dynamic Host Configuration Protocol (DHCP)	DHCP client
IPv6 Host	Yes

WIRELESS
Frequency	Dual concurrent radios (2.4 and 5 GHz)
Radio and Modulation Type	Dual radio, orthogonal frequency division multiplexing (OFDM)
WLAN	802.11n 2×2 multiple-input multiple-output (MIMO) with 2 spatial streams 20 and 40 MHz for 802.11n PHY data rate up to 600 Mb/s
Data Rates Supported	802.11a/b/g: 54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2, and 1 Mb/s802.11n: 6.5 to 300 Mb/s 20 MHz Bandwidth: MCS 0-15 for supported data rates 40 MHz Bandwidth: MCS 0-15 for supported data rates
Frequency Band and 20 MHz Operating Channels	A Regulatory Domain: 2.412 to 2.462 GHz; 11 channels 5.180 to 5.240 GHz; 4 channels 5.745 to 5.825 GHz; 5 channelsE Regulatory Domain: 2.412 to 2.472 GHz; 13 channels 5.745 to 5.805 GHz; 4 channels
Nonoverlapping Channels	Maximum Channels: @2.4 GHz; 802.11b/g; 802.11n; 20 MHz: 3 @5 GHz; 802.11a; 802.11n; 20 MHz: 9 @5 GHz; 802.11a; 802.11n; 40 MHz: 3
Wireless Isolation	Wireless isolation between clients
Internal Antennas	Internal fixed PiFA antenna
Antenna Gain In dBi	Maximum antenna gain of 3.4 dBi on 2.4 GHz Maximum antenna gain of 4.5 dBi on 5 GHz
Wireless Distribution System (WDS)	Yes
802.11i Security	Yes
Multiple SSIDs	8
Wireless VLAN Map	Yes
WLAN	Yes
Wi-Fi Multimedia (WMM)	Yes, with unscheduled automatic power save

OPERATING MODES
Access point	Access Point mode, WDS Bridging, Workgroup Bridge mode

ENVIRONMENTAL
Power Options	IEEE 802.3af/at Ethernet switch Cisco Power Injector: SB-PWR-INJ2-xx (not included) AC Adapter: Included 12 V, 1.5 A PoE Peak Power: 7.42 W
Compliance	Safety: UL 60950-1 CAN/CSA-C22.2 No. 60950-1 IEC 60950-1 EN 60950-1Radio approvals: FCC Part 15.247, 15.407 RSS-210 (Canada) EN 300.328, EN 301.893 (Europe) AS/NZS 4268.2003 (Australia and New Zealand)EMI and susceptibility (Class B): FCC Part 15.107 and 15.109 ICES-003 (Canada) EN 301.489-1 and -17 (Europe)
Operating Temperature	32 to 104°F / 0 to 40°C
Storage Temperature	-4 to 158°F / -20 to 70°C
Operating Humidity	10 to 85% non-condensing
Storage Humidity	5 to 90% non-condensing

PHYSICAL
Mounting Options	Desktop
Dimensions	6.7 x 6.7 x 1.4″ / 17.0 x 17.0 x 3.6 cm
Weight	0.89 lb / 0.40 kg

Be the first to review “Cisco WAP131 Wireless-N Dual Band Access Point”

Reviews

There are no reviews yet.

We are a Dubai based Computers, Printers, Data Storage and Servers Distributor with customer base in Middle East and Africa .

Cisco WAP131 Specs

Reviews

See It Styled On Instagram

Main Menu